Eliminates the guesswork when bottle feeding your baby. Shows at a glance when the bottle is too cold, too hot or, just right.
Fast reading - shows temperature in approximately 15 seconds
Reusable, adjustable Velcro band
Fits all baby feeding bottles
Directions for use:
Shake bottle thoroughly after warming to insure that there are no "hot-spots" within the bottle
Place the Velcro band snugly around the bottle, below the
level of the liquid
Leave in place until colors stop changing in about 15 seconds.
Read the temperature while the thermometer is still on the
The correct temperature of the bottle contents will be
indicated by the square on the thermometer which turns
green. If green is not visible, the temperature will be mid-way
between that illuminated by the tan and blue colors.
Always remove the thermometer from the bottle before
feeding or heating.
Note: If the thermometer remains black, the liquid in the
bottle is either too hot or too cold.
Explanations of symbols:
"" TOO COLD - heat up slightly more."" - IDEAL, "+" TOO
HOT - let bottle cool until reappears. Shake bottle and re-check thermometer.
For best results:
After use, store the thermometer in its protective plastic case,
away from direct sunlight, dampness or heat. Do not microwave the bottle with the thermometer attached.
"Hot spots" can give misleading readings. Remove the bottle
from the microwave oven, shake the bottle vigorously and
apply the thermometer, reading the temperature as indicated.
Do not sterilize or boil bottle with the thermometer attached.
|Made in USA|
|US MARKET||EXPORT||Bar Code:|
|Case Pack:||24 units||1,200 units|
|Inner Packs:||4 x 6 units||150 units|
|Case Weight:||1.7 lbs||54 lbs|
|Case Size:||4 1/4L x 7 1/4W|
x 2 3/4 inches
|25L x 25W|
x 31H inches
|UPC Codes:||16912-13201 ||16912-13201|
If you've found us from another site, please go to our Home Page for information on our other products. Distributor inquiries go to our Customer Profile Form.