The most convenient way to take an infant's or toddler's
temperature - for both the child and the parent.
Beeps when ready
Accurate to within ±0.2°F/0.1°C
Display with readouts in 0.1°F/0.1°C increments
Orthodontic nipple in silicone
Battery life of more than 200 hours
Directions for use:
Press and hold the on/off power button. The display will read
"188.8°E" confirming that the display is working. Release the
power button and the display will show "L °F" (L °C) with the "°F" (°C) flashing. When the flashing stops, the pacifier thermometer is ready to measure body temperature.
Position the pacifier nipple in baby's mouth. At 90°F (32°C), the
display will change to temperature indication. The degree
(°F/°C) sign will stop flashing and the unit will beep to indicate
completion (usually after 2-3 minutes).
If a more accurate reading is needed leave Pacifier Plus® in
place for a longer period (5-6 minutes).
Pacifier Plus® will turn off automatically after 16 minutes.
However, to prolong battery life turn it off after use.
Take temperature readings 30 minutes after feeding as body
temperature is higher after eating and drinking. Oral
temperature may vary from rectal temperature by 1.0°F/0.6°C or
more. If feverish condition persists, notify physician.
Use for temperature taking only, under adult supervision. Do not use as a regular pacifier.
Do not boil but wash pacifier in warm, soapy water and rinse.
Store at room temperature (65°F - 90°F/18°C - 32°C). Do not attempt to
disassemble and avoid dropping unit. Discard when the pacifier
nipple part shows sign of cracks, tears and excessive wear.
Conforms to the US.Consumer Product Safety Commission Requirements for Pacifiers 16CFR Part 1511.
|US MARKET||EXPORT||Bar Codes:|
|Case Pack:||24 units||800 units|
|Inner Packs:||2 x 6 units||100 units|
|Case Weight:||2.0 lbs||54 lbs|
|Case Size:||7 1/2L x 7 1/4W|
x 10 3/4 inches
|25L x 25W|
x 31H inches
|Product Codes:||12411 (Fahrenheit)|
|UPC Codes:||16912-12411 (F)|
If you've found us from another site, please go to our Home Page for information on our other products. Distributor inquiries go to our Customer Profile Form.